Wallpaper Guide
THE non-woven wallpaper is a type of wallpaper that has completely changed the usual installation traditions. No wallpaper table is needed, the glue is applied directly to the wall. Non-woven fabric does not require any special preparation and is easy to cut. Simple and quick, non-woven fabric makes decorating child's play.
Have you recently ordered several rolls of wallpaper to breathe new life into a particular room? Are you now determined to hang it without losing your hinges?
We would like to reassure you, as leading online wallpaper store In France, we are legitimate to give you the best guide and meet your expectations. From the preparation of your walls to the required tools, you will become an expert in wallpapering!
How to install non-woven wallpaper
Allow a few hours before you start hanging your future wallpaper. walls must be prepared & correctly and sanded with the appropriate grit of sandpaper.
Our team will take care of preparing the rolls for you!
Tools for optimal non-woven wallpaper installation
- A pair of gloves
- Wallpaper paste (found on Amazon, we highly recommend the brand Metylan)
- A pair of scissors
- One meter
- Brushes glue
- A cutter
A scraper may be required if bubbles appear.
Clean the wall on which the wallpaper will be placed
For a successful pose, Your walls must be clean, dry, intact, smooth and uniform. For new walls (plaster, Placoplâtre, wood), please apply a primer the day before to make it easier to hang the wallpaper. For walls covered with matte paint, please use the detergent Renovocai for cleaning. Let your walls dry for about 24 hours before applying the glue.
For walls painted with gloss or satin paint, sand them first. You can then apply an undercoat which will be the last step in preparing your wall.
Laying non-woven wallpaper
- Gather all the necessary tools as mentioned above
- See the step for cleaning your wall (to be prepared 24 hours before installing your wallpaper)
- Check the dimensions of the wallpaper, the connections in relation to your wall. Match the patterns
- Depending on the width of each roll, mark the vertical lines using a pencil or marker (the lines will later be covered by the wallpaper)
- Apply the glue on the back of each of your rolls of wallpaper (work roll by roll to avoid losing any adhesion)
- Carefully stick your roll to the wall by cutting off the excess parts with your cutter. You can then use a clean cloth to remove the excess glue.
- Same process as for the first roll, but be careful to match the patterns and design for an optimal result.Remember to remove any excess glue from the edges of each roll once it has been installed.
- Cut out each of the excess pieces using your cutter so that the designs fit together perfectly.
- Use the scraper to make the wallpaper flat and obtain an optimal visual rendering. (if bubbles appear, wait 48 hours so that they resolve themselves.)
- Close all doors and windows that could bring in a draft to achieve natural drying.
Do not hesitate to contact our team who will be able to help you contact@papierpeintfrance.com